      Home > Moto Parts > Yamaha MT-07 Parts > SRmoto Yamaha MT-07 Project Bike We picked up our 2025 Yamaha MT-07 Project Bike in early February 2025 and will be using it to test new MT-07 aftermarket parts and accessories. The bike is currently mostly stock, but we have done a few upgrades (see below). Stay tuned for more updates as we install parts and accessories on the bike. You can follow along with our build at our Yamaha MT-07 Build and Update Blog. Our 2025 Yamaha MT-07 Project Bike currently has the following mods and accessories... One of my first minor complaints with our new MT-07 was the stock mirrors. First I didn't care for the look of them, and second visibility was pretty bad, especially with the left side mirror, which has you looking right at your shoulder. We pulled the OEM mirrors off right away and have tried a few of the CRG Mirrors, mounted to the handlebars with our Rhino bar end slider / mirror mounts. We've tried all 3 of the CRG's, including the Blindsight LS 2" mirrors, the Hindsight LS 3" mirrors, and the Arrow mirrors as well. All of them provide much better visibility than the stockers, and from a looks standpoint I think the Arrows look the best with the angular lines of the MT-09, and the small Blindsight LS 2" mirror is probably our second favorite, followed very closely by the Hindsight LS 3". You can't go wrong with any of these mirrors, however, they just make the bike look so much better, and you can actually see out of them! We also swapped out the stock clutch and brake levers for one of our personal favorites, the CRG RC2 shorty levers. We've run the RC2 levers on our Yamaha XSR900 project bike for several years now, and they are a huge improvement over the stock levers. These levers have reach adjustment so you can fine tune their positioning, and the 3 finger length IMHO is the perfect length for a set of levers... not too short and not too long. This is one of the best upgrades you can do to the bike! ** NOTE: These items also available individually... We install these brake light safety pulsers on all of our bikes. They are simple plug-n-play modules that let you customize the way your brake light flashes. It's a nice safety item to help drivers see you on the road! The Yamaha MT-07 doesn't come from the factory with any easy way to mount swingarm spools so that you can use a standard rear stand to lift the rear of the bike. We've found the best way to lift our MT-07 project bike is the stand at the link below, which uses padded adapters to lift from the bottom of the swingarm... Shop for Yamaha MT-07 Parts. |
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. ©Copyright 2002-2025 by Devo Tech, Inc. |