 Home > Package Deals > Schroth Quick Fit Rallye 4 Package This is the ultimate package for autocrossers or track day participants, and it also happens to dress up the interior of your car very nicely. Schroth belts are both functional and beautiful! This package includes left and right side Schroth Rallye 4 Quick Fit harness belts. Matching Schroth harness pads and adjusting grips can be added for an additional cost. Designed specifically for E36 BMW's, E46 BMW's, E82 1 Series and E90 / E92 3 Series BMW's, MINI's, Subaru WRX/STi's, and 2005-2014 Ford Mustangs, these unique belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Most points simply click into the factory seat belt female receptacles. Where an additional attachment point is needed, a small quick release connector is installed to a readily accessible stock seat belt point in less than ten minutes. When not in use, the entire harness is simply unclicked and removed from the car. This is the first and currently the only DOT approved aftermarket harnessbelt of its kind. No drilling holes or removal of factory belts. This belt “piggybacks” the factory seatbelt bolt points, meaning you leave your factory belts installed and can use them whenever you are not using the Schroth harness. Another key selling point is that these Schroth belts utilize the factory pre-tensioner by clipping into the factory female receptacle. The pre-tensioner tightens the lap belt about 2” during an impact, further preventing the occupant from submarining. Also, since the belts clip into the female receptacle, the computer recognizes the seat belt is in use and deploys the airbag at a slower, less violent rate. SUBARU NOTE: These belts are designed specifically for the 2002-2005 Subaru WRX and WRX STi, however Subaru has made a change to the 2006 models and the belts do not fit. If you have a 2006+ Subaru, do not order these harness belts as they will not fit. MINI NOTE: Please choose the correct belt for your specific MINI... R50/R52/R53 Chassis (Model years 2001-2006) or R55/R56/R57 Chassis (Model year 2007+). VW NOTE: These belts may only be used in the Audi/VW vehicles specified here... Schroth Audi/VW Quick-Fit Vehicle Reference List (right click, save as). Please note that these belts will not work with the new VW R32 since the stock seats have an integrated headrest with no hole for the harnesses to pass through. Audi NOTE: The Audi B6 chassis does not have a provision for a bolt-in harness on the out-board lap belt point. This means that you cannot safely install ANY aftermarket harness to DOT points. Installing these harnesses in an Audi B6 chassis car will not be a Schroth Approved Installation! |
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. ©Copyright 2002-2024 by Devo Tech, Inc. |