(click photos to enlarge)
Home > Dual Sport >
Honda CRF250L Parts
Home > Dual Sport >
Honda CRF250L Rally Parts > CRF250L Edge Tail Light Kit
The new DRC Edge2 Tail Like kit (commonly referred to as the Edge Tail Light Kit) will help clean up that ugly rear fender and tail light assembly on your Honda CRF250L. It is available with a Red or Smoke tail light lens. All LED's come on as a running light, then all get brighter when brakes are applied. License plate illumination is provided by 3 white LED's on the bottom of tail light.
DRC has introduced a new updated kit for the 2017+ bikes that will work with that bikes stock turn signals or aftermarket LED turn signals. It will also work with a US spec license plate and no adapter would be required. The 2013-216 kit is also available that will work with that bikes stock turn signals or aftermarket LED's. Choose your bikes model year from the "Bike Model Year" dropdown to make sure you get the correct kit for your bike.
Fitment: 2013-2016 and 2017+ Honda CRF250L / Rally. Part Numbers are as follows:
2017+ CRF250L DRC EDGE2 Tail Light, Red Lense: D45-18-708
2017+ CRF250L DRC EDGE2 Tail Light, Smoke Lense: D45-18-508
2013-2016 CRF250L DRC EDGE2 Tail Light, Red Lense: D45-18-707
2013-2016 CRF250L DRC EDGE2 Tail Light, Smoke Lense: D45-18-507
DRC Edge2 tail light holder kit designed specifically for the Honda CRF250L
Comes with Edge tail light (red or smoke lens), license plate and flasher mount
Compact design that really cleans up rear end of the bike
Tail light bracket is made of steel for extreme durability
Integrates nicely into the black under-fender on the bike
Special oval bolt hole allows to adjust up and down tail light position
Two different flasher mounting holes for both 8mm LED flashers or OEM flashers
Kit includes the following:
DRC Edge2 Tail light (red or smoke lens)
Bracket for mounting the light and license plate to subframe
Turn Signal mounting points
Hardware and Instructions
** OPTIONAL: LED Flashers/Turn Signals:
The DRC Edge 2 Tail Light Kit does not include flashers/turn signals. You can either re-use your stock rear turn signals/flashers (which can be bolted right to the bracket), or you can use aftermarket LED turn signals/flashers like the DRC Type 601 or Type 602's, by choosing from the "LED Flashers" dropdown below. More info on those here...
DRC Type 601 LED Flashers (rigid)
DRC Type 602 LED Flashers (flexible)
** OPTIONAL: Fixed Rate Flasher:
If you plan on using LED Flashers (like the DRC Type 601 or Type 602) with this kit, you must also install our 12oClockLabs Fixed Rate Turn Signal Flasher, otherwise the LED flashers will not work. This simple plug-in device will also get your flashers to flash at the slower factory flash rate. You can add this to your order by choosing it from the Options drop-down below.
** OPTIONAL: OEM Wiring Connector Kit - Rear: (Photo)
This kit can be used to connect the DRC tail light/flashers to the OEM connector/plug on your bike. You install the connector on the wiring for your new tail light and flashers, which then allows you to plug them into the OEM connector/plug already on your bike. Creates a fully plug and play installation!!
CRF250L Lighting Package Deal (front & rear lights)
CRF250L Edge2 Integrated Tail Light Package Deal
** In Stock - Usually leaves our warehouse same business day
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering.
Our on-line store is up and running 24 hours a day, 7 days a week. We use Aabaco Small Business Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options.
RacingHelmetGuide.com | SRmoto.com |
ęCopyright 2002-2018 by Devo Tech, Inc.