(click photo to enlarge) Home > Reviews/Installs > Schroth Rallye 4 for the Mini Cooper Introduction: Schroth has finally designed a Rallye 4 harness belt specifically for the new Mini Cooper. These belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Once installed, they simply clip in and out in a matter of seconds! For quite some time, Schroth has been supplying high quality and well built seat harnesses for professional and enthusiast racers. The quality is so good and the product is so well tested that they are the only harness to carry DOT approval for street use. This Mini Cooper Rallye 4 harness belt features asm technology, a 4-point mounting configuration with individual adjusters, and quick-release mounting points that allow the belts to be removed when not in use. Review: Coming soon... Installation Tips: Before attempting installation, thouroughly read the instructions that came with your Schroth harness belts, and refer to them while doing the installation. Have a professional install the harnesses if you unsure of what you are doing. Once the belts are installed, adjust the shoulder and lap belts appropriately. This will require you to adjust the seat to its racing position, then sit down, put on the belt, and check it for tightness. Always tighten the lap belt first, and once its tight, pull down on shoulder adjusters to tighten them. When properly adjusted, the belts will hold you in comfortably but firmly. Make sure the lap belt is NOT riding up on your stomach. The rear shoulder belt and lap belt can both be adjusted longer/shorter based on your requirements. You may find yourself getting in and out of the belts a few times, to shorten or lengthen the shoulder belts, until you find an adjustment that works. Adjusting the belts usually takes 5-10 minutes. Photos: Review: Schroth Rallye 4 for Mini Cooper (5/21/2003) rallye4inmini Shoulder belts clip in and out in seconds (click photo to enlarge) The shoulder belts clip into the factory seat belt on the inward side, and clip into an installed Schroth 4" adapter on the outward side. This allows the belts to be removed from the car by just unclipping them, and when its time to autocross, just clip them back in! shoulbelclip1 Lap belts clip in and out in seconds (click photo to enlarge) The lap belts clip into the factory seat belt on the inward side, and clip into an installed Schroth 4" adapter on the outward side. This allows the belts to be removed from the car by just unclipping them, and when its time to autocross, just clip them back in! lapbelclipin1 WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. SRmoto.com |  Corbeau USA ©Copyright 2002-2024 by Devo Tech, Inc.