      Home > Dual Sport > KTM 350 / 500 EXC-F Parts Home > Dual Sport > KTM / Husqvarna Parts > Supermoto Mirrors If you're looking to get rid of the big ugly mirrors that come stock on your KTM 690 SMCR, Husqvarna 701 supermoto or other KTM / Husqvarna dual sport bike that you've converted to an SM, these quality billet aluminum mirrors might just do the trick. You can mount them in the end of any handlebar as bar end mirrors, or remove the bar end inserts like we do, and clamp them to virtually any handlebar. We now offer a Standard model and a more high end PRO model (see differences below). Quantity: You get two (2).... they come in left/right pairs. Differences between the Standard and PRO Model... Standard Model Features: PRO Model Features: The PRO model may look/work similar to the Standard model, but has a few differences... First the back side of each mirror has been CNC machined for a more high end look, compared to just a smooth finish on the Standard model. Second, the clamp design is also different, and will fit into tighter areas on the handlebars compared to the Standard model. Finally, the PRO model clamp is a simpler design, with just 2 allen screws per clamp, compared to 2 allen screws and 2 nuts per clamp for the Standard model, which makes the PRO a little easier to install. (**OPTIONAL) MIRROR HOLE PLUGS: (adds to price) When you install our Supermoto Mirrors, you will remove your bike's stock mirrors, which then leaves the unsightly threaded holes in the brake and clutch perch. Our mirror hole plugs are made from 7009 aluminum and come in several colors. They'll thread right in to the threaded mirror mount holes on most Japanese and European bikes. Come in Pairs. (click for photo) Visibility: How well can you see out of them? Visibility when mounted far out on the bars close to the controls as shown in photos above is great, and you can see to your sides and behind you. Additionally, un-like a lot of aftermarket mirrors, these mirrors do not vibrate. Fitment: These will work on most 7/8" or 1 1/8" handlebars, and they should fit most dual sport, supermoto and off-road bikes thanks to their narrow profile. On oversized 1 1/8" bars, you will need to clamp them out near the controls where the bars taper down to 7/8". We've used these mirrors on all of our supermoto project bikes, including our KTM 690 SMCR Build. To install them, we clamped the mirrors to the handlebars as shown in the photos above. We've had customers use these mirrors on the following bikes... NOTE: On some KTM and Husqvarna models, fitment on the front brake reservoir side of the handlebars can be tight because of how close the reservoir is to the handlebar. The PRO model clamp is a lower profile design, so it fits better on these bikes. On most of these bikes you can get the mirror clamp on right next to the brake reservoir, but you might have to loosen up the brake lever perch so you can squeeze the clamp in between. On our 690 SMC R we were able to mount the clamp just to the left of the brake reservoir. (see photo 1 and photo 2) NOTE: These mirrors are ideal for street and supermoto type motorcycles. If you are looking for more of an off-road or dual sport mirror, we carry the DoubleTake Dual Sport Mirror, which is arguably the best mirror on the market for dual sport riding. ** IN STOCK - The Standard and new PRO Model are in stock and usually leave our warehouse in 1-3 business days. |
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. ©Copyright 2002-2024 by Devo Tech, Inc. |