    Home > Dual Sport > Suzuki DRZ400SM/S Parts > Yoshimura RS-2 Stainless / Carbon Exhaust Add some fire to your rides with Yoshimura's Comp Series RS-2 full exhaust system. This Full System comes with a Carbon Fiber muffler, a stainless steel header and mid pipe, installation hardware, and detailed instructions to get you moving! Yoshi also includes a cool looking laser etched heat shield for the header, and a USFS approved Spark Arrested insert comes pre-installed in the muffler. Fit and finish is typical Yoshimura, and it looks downright awesome on the bike. The system has a very deep tone, and sounds, frankly, bad a$$. Also as part of the package, you can optionally add a Jet Kit (either Dynojet or JD Jetting) to get your bike running correctly and help take advantage of the new performance exhaust system. You can also add a Kientech Fuel Screw and either a No Toil or K&N Air Filter to the package as well. FITMENT: 2001-2024 Suzuki DRZ400S and DRZ400SM \ DYNO RESULTS: We have this exact system on our 2008 DRZ400SM Project Bike, and love it. Besides the exhaust system, we also did the 3x3 airbox mod, replaced the stock air filter with a K&N air filter (see option below), and jetted the carb with a Dynojet Jet Kit (see option below). These relatively simple modifications totally transformed the performance and sound of our bike, and we highly recommend it for any DRZ400S or DRZ400SM rider! After installing the exhaust, air filter, and doing the 3x3 mod, we had the carb jetted and tuned at our local race shop (MPH Ohio) and here are the results... Stock 2008 Suzuki DRZ400SM (According to Motorcyclist Magazine) Max horsepower: 32.5 bhp @ 7850 rpm Max torque: 23.9 lb.-ft. @ 6750 rpm Our 2008 Suzuki DRZ400SM Project Bike (without Dynojet Jet Kit) - SRmoto.com Yoshimura RS-2 Performance Package - 3x3 Airbox Mod - Carburetor NOT re-jetted Max horsepower: 34.01 bhp @ 7200 rpm Max torque: 24.41 lb.-ft. @ 6400 rpm Our 2008 Suzuki DRZ400SM Project Bike (with Dynojet Jet Kit) - SRmoto.com Yoshimura RS-2 Performance Package - 3x3 Airbox Mod - Carburetor re-jetted with Dynojet Jet Kit Max horsepower: 36.27 bhp @ 7200 rpm Max torque: 28.57 lb.-ft. @ 5800 rpm Overall we are very pleased with these results considering how simple these modifications were to do to the bike. The numbers above show the importance of properly jetting the carburetor with the appropriate Jet Kit. Without that, the bike ran poorly, and as you can see from the results, we weren't maximizing performance gains from the Yoshi exhaust, aftermarket air filter, and 3x3 airbox mod. If you're riding your DRZ with the stock exhaust, or even a slip-on, you are really missing out on the performance gains you get out of a full system like this. PACKAGE INCLUDES THE FOLLOWING... ** OPTIONAL: DRZ400S / DRZ400SM Jet Kit: ** OPTIONAL: DRZ400S / DRZ400SM Kientech Fuel Screw: ** OPTIONAL: DRZ400S / DRZ400SM Air Filter: Video Review: ** IN STOCK - Usually leaves our warehouse in 1-3 business days. NOTE: We can only ship this product to the Continental US, and therefore cannot ship to Alaska, Hawaii or Canada. Additionally we cannot ship to California because of CARB regulations. If you are from any of these locations and order one, it will have to be removed from the order. |
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. ©Copyright 2002-2024 by Devo Tech, Inc. |