DRZ400S DRZ400SM Edge2 Integrated Tail Light Package Deal

DRZ400S DRZ400SM Edge2 Integrated Tail Light Package Deal

** OUT OF STOCK - We now carry the 12oClockLabs Integrated Tail Light !

Home > Dual Sport > Suzuki DRZ400SM/S Parts > DRZ400 Edge2 Integrated Tail Light

If you're looking to clean up that ugly rear fender on your Suzuki DRZ400, this package provides you with a tail light that has the turn signals integrated into it, and therefore there is no need for separate external rear turn signals/flashers.

The package includes the popular DRZ400 DRC Edge2 Tail Light kit, along with a 12oClockLabs DRC Edge2 Processor Upgrade Board. The upgrade board is a drop in replacement for the OEM LED board inside the Edge Tail Light, and provides programmable integrated turn signals, as well as safety brake pulsing. The unit also has brighter LED's than the stock Edge2 board, and is designed with 500,000 life hour capacitors for exceptionally long life operation.

NOTE: The license plate bracket on this DRC tail light is spec'd for Japanese license plates. If you have a US license plate, you will need to drill two new holes in it to mount it up to the DRC license bracket. If you don't want to have to do that, we highly recommend the 12oClockLabs Integrated Tail Light Kit, which will work with a US license plate.

Fitment: 2000-2023 Suzuki DRZ400SM / DRZ400S

The package includes the following:

One (1) DRZ400 Edge2 Tail Light Kit:

Edge Tail light (red or smoke lense)

Brackets for mounting the light and license plate

Turn Signal mounts (if you ever want external turn signals)

Hardware and Instructions included

One (1) 12oClockLabs DRC Edge2 Processor Upgrade Board

5 user selectable turn signal patterns [half chase, full chase, fixed blink, normal blink, etc.]

Automatic safety brake pulsing with Enable / Disable

The brightest LED's you can get; 500,000mcd light output at maximum brightness

Low current draw; with an average 4.5watts at full brightness.

Built-in license plate light with 3 super bright white LEDs

Includes 34 inch pre-attached wiring harness

Includes 30 inch wire harness jacketing

3 year product replacement warranty

Made in the USA

One (1) Suzuki OEM Wiring Connector Kit:
This kit can be used to connect the DRC tail light/integrated turn signals to the OEM connectors on your bike. You install these Suzuki OEM tail light and turn signal connectors on the wiring for the 12oClockLabs Processor board (which you've installed inside the Edge2 Tail Light), which then allows you to plug directly into the OEM connectors already on your bike. Creates a fully plug and play installation.

** OPTIONAL: Fixed Rate Flasher: ($28.00)
A 12oClockLabs Fixed Rate Turn Signal Flasher is HIGHLY recommended for the DRZ400S/SM. There have been issues with LED's not working properly on these bikes, and this will address that issue. Additionally, if you install this integrated LED tail light on your bike, it will make your front turn signals flash at a faster rate than they did with the stock non LED tail light/turn signals. The 12oClockLabs Fixed Rate Flasher will fix that, and slow down the flash rate of your front turn signals. You can choose that option from the drop down below.

VIDEO REVIEW:

** OUT OF STOCK - We now carry the new 12oClockLabs Integrated Tail Light !

WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering.

Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options.