We run these Motogadget mo.blaze LED Turn Signals on one of our Honda CRF450RL supermoto project bikes and have gotten so many questions about the LED turn signals on it, that we decided to put together this kit that includes everything you need to switch over to these LED turn signals if you so desire...
This simple kit gives you everything you need to replace your Honda CRF450L / CRF450RL stock front or rear turn signals with our favorite set of LED turn signals, from Motogadget. You get a pair of Motogadget mo.blaze LED turn signals with ample wiring, a set of turn signal holder plates to mount the turn signals to the bike, your choice of front or rear Honda OEM connector plugs, and an optional fixed rate flasher module to make the signals flash appropriately.
Fitment: 2019+ Honda CRF450L / CRF450RL
WHAT YOU GET WITH THE KIT:
One (1) pair of Motogadget mo.blaze LED turn signals w/wiring
One (1) set of 12oClockLabs Flasher Holder Mounting Plates for Honda CRF's
Your Choice Of Turn Signal Connector Kit:
Choose from front or rear connectors depending on what end of the bike you are installing them on. For the front you will get 12oClockLabs Running Light Adapter connectors which come with the Honda OEM connector plugs pre-installed and will allow your new front LED's to work both as turn signals and running lights (like the stock signals do). For the rear you get a pair of the Honda OEM connector plugs to wire the rear turn signals.
** OPTIONAL: Fixed Rate Flasher: (adds to kit price)
If you install Motogadget mo.blaze LED turn signals on your Honda CRF450L/RL, you must replace the stock fixed rate flasher module in order for the turn signals to work properly, and also so that they flash at the normal slower stock rate (instead of hyper flashing). The bike only requires one (1) of these modules, which controls both front and rear turn signals. It's a simple plug-n-play module located up under the headlight shroud.
Is this kit plug-n-play?
The Motogadget LED's are universal, so they do not come with any bike specific connector plugs pre-installed. We've put this kit together to provide everything needed to mount the signals on your bike, which means you get the Honda OEM connector plugs, however we do not install them on the LED wires. In either case, whether you are doing front or rear signals, you won't need to cut any wiring on your bike.
For the front turn signals, you get the 12oClockLabs Running Light Adapters (RLA), so it ends up being about 90% plug-n-play. The RLA's have the Honda OEM connector plugs pre-installed, so that plugs right into the turn signal harness on the bike, then the other end of the RLA's have female clip connectors installed. The Motogadget LED's come with their own connectors, so we used those instead of the bullet crimp connectors, to connect the LED's to the RLA's. The RLA's are basically wired in-line between the turn signals and the bikes harness.
For the rear turn signals, you get the Honda OEM connector plugs, so you'd just need to use the connectors that come with the Motogadget LED's to attach the OEM plugs to the LED wires, then plug them into the harness on the bike. Some people may choose to solder or use butt connectors instead of the included Motogadget connectors.
About The Motogadget mo.blaze LED turn signals:
The Motogadget mo.blaze is a very special LED blinker with a patented TranzLight-Technology® that directs the light of the high-performance LED through a transparent glass body. This innovative approach turns the glass body itself into a blinker. Almost invisible when switched off, the mo.blaze pin emits light from all sides when switched on, providing additional visibility and safety. Piercingly bright and infinitesimally small by turn signal standards, the mo.blaze Pin LED is just what you need when you need to have something small but bright. Measuring only 16mm (5/8˝) in diameter and 19.5mm (3/4˝) in length the compact size of the m-Blaze Pin Turn Signals may get overlooked on most bikes. However once the m-Blaze Pin is activated, the IntensiLED Technology is extremely bright and visible despite its stature.
Video Review on our CRF450RL Supermoto:
** IN STOCK - Usually leaves our warehouse in 1-3 business days.
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering.
Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options.