|Home > Dual Sport >
Honda CRF250L Parts |
Home > Dual Sport >
Honda CRF250L Rally Parts > Yoshimura RS-4 Slip-On Muffler Package
Everything you need to unleash the full potential of your Honda CRF250L or CRF250L Rally! Our Yoshimura RS-4 Performance Slip-On Package starts out with Yoshimura's RS-4 Slip-On Muffler, featuring a turn-out end-cap, mid-pipe, and low-volume insert. This system re-uses your stock header pipe which connects to the Yoshi mid pipe. You can optionally add an EFI (electronic fuel injection) Controller, which is a plug-n-play device that will help take advantage of your new performance exhaust system and also make your bike run properly. Finally, you can also optionally add a heat shield for the muffler and also a 13 Tooth Front Sprocket and/or a Yoshimura Spark Arrestor Kit.
The Yoshimura RS-4 Muffler is a unique design with predicated power and a quiet earthy exhaust note that speaks volumes for performance. This RS-4 features all the benefits of Yoshi's original RS-4 muffler, but with a unique turned-out end-cap, designed to direct exhaust heat and gases away from the bike's components. To top-it-off, they embossed the Yoshimura "347" logo in the carbon for a clean look. A heat-shield was also added to the poly-resonant chamber to keep rider and passenger legs from exhaust heat. With all its benefits in mind, the RS-4 was an obvious choice for the CRF250L.
Fitment: 2017+ Honda CRF250L and Rally
CRF250L Stock Muffler w/ Heat Shield: 13.50 lbs
CRF250L Yoshimura RS-4 Muffler w/ Heat Shield: 7.80 lbs
TOTAL WEIGHT SAVINGS: 5.7 lbs
PACKAGE INCLUDES THE FOLLOWING...
Yoshimura RS-4 Muffler with turned-out end cap
Yoshimura Stainless Steel Mid-Pipe
Yoshimura RS-4 Low volume insert
All installation hardware
Yoshimura Part #123402D520 (2017+ CRF250L / Rally)
** OPTIONAL: EFI Controller (adds to package price):
An EFI (Electronic Fuel Injection) Controller is HIGHLY recommended any time you install an aftermarket exhaust and/or air filter on your fuel injected bike, otherwise you will see little to no performance gains, and the bike may even run poorly. At this time, we offer two different EFI options, the EJK EFI Controller and the JD Jetting EFI Controller. Details below. Each are simple to install and plug into existing wiring using stock connectors.
Pre-programmed specifically for a Honda CRF250L
Simple install. Plugs into existing wiring using the stock connectors
Simple and easy tuning with no dyno required
Simple Push Button Adjustment Interface
Does not require a computer or software to tune
"On-the-fly' tuning. You can make fuel adjustments in your garage or on the side of the road
Does Not Interfere with Stock ECU Operation
EJK EFI Controller 2017+ CRF250L - Part #9110044 (click for more info)
JD Jetting EFI Controller CRF250L - Part #JDHX03 (click for more info)
** OPTIONAL: Yoshimura Heat Shield (adds to package price):
Bolts up to Yoshimura muffler for extra heat protection
Made with USA made aluminum
Black anodized with laser etched logo
Must have for the CRF250L passenger
DOES NOT WORK ON CRF250L RALLY MODEL
** OPTIONAL: 13T Front Sprocket (adds to package price):
Many CRF250L owners swap out the stock front sprocket for a smaller 13T, so we've added it as an option for our FMF performance package. The sprocket is made from case hardened nickel chrome molybdenum steel. Choose the option below if you want us to include the sprocket as part of the package.
** IN STOCK - Usually leaves our warehouse in 1-2 business days
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering.
Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options.
©Copyright 2002-2021 by Devo Tech, Inc.