Barkbusters LED White Position Indicators / Running Lights
Barkbusters LED White Position Indicators / Running Lights
Barkbusters LED White Position Indicators / Running Lights
Home > Moto Parts > Handguards

Home > Moto Parts > Honda Transalp XL750 Parts

Home > Moto Parts > Yamaha Tenere 700 Parts > Barkbusters LED White

Looking to increase your visibility on the road and trail? Barkbusters offers bright white LED position indicators / running lights that can be mounted to any of their Storm, VPS or JET plastic guards. These LED's are meant to be used as running lights and not turn signals/flashers. Wiring, mounting hardware, and instructions are included.

Installation on 2024+ Honda Transalp XL750:
We decided to install a set of these LED's on our Honda Transalp XL750 Project Bike, which already has Barkbusters Handguards with Storm Plastic Guards. Instructions are included with the LED's, along with templates to drill the 3 holes in each plastic guard to mount the LED's. This was a pretty simple process thanks to the thorough instructions. Next you have to find an ignition switched power source to wire the LED's to... this will vary from bike to bike, and on the Transalp we found a wired plug up under the TFT dash that is used to connect the Honda Accessory 12V Socket (Honda Part #: 08U71-MKK-D00) that installs on the left side of the dash by the TFT display. This looked like the perfect wiring to tap into that could power the LED's. One interesting thing though, this plug does not have power until you also install Honda Accessory 12V Fused Socket Harness (Honda Part #: 08E70-MLC-A00) which plugs in up under the seat. Once we installed the Accessory 12V Fused Socket Harness under the seat, we now had power, and were able to use the JOW T-Connectors included with the Barkbuster LED's to tap into the wire and get power to the LED's. There might be other wires that could be used as a power source, but this looked like the best option. It's just a shame that Honda requires you to buy that Accessory 12V Fused Socket Harness to get power to that plug under the dash.

Standard Features:
  • LED White Light Ė Position (set of 2).
  • Increase your visibility to other road users.
  • Can be fitted to the upper surface only of JET guards.
  • Can be fitted to the upper and/or lower surface of VPS and STORM guards.
  • E mark approved as a Position light.
  • Each LED cable in approximately 700mm (27.5 inches) in length.
  • 15 super bright LEDís per light.
  • Low power draw.
  • Part #: LED-002-02-WH

  • ** IN STOCK - Usually leaves warehouse in 1-3 business days.

    Barkbusters LED White Position Indicators / Running Lights
    BARKBUSTERS-LED-WHTRetail Price: $74.95Our Price: $74.95

    WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering.

    Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. |  Corbeau USA
    ©Copyright 2002-2024 by Devo Tech, Inc.