 Home > Reviews/Installs > Schroth Rallye 4 for the BMW E39 5 Series Schroth has finally designed a Rallye 4 harness belt specifically for the E39 5 series BMW. These belts offer "clip-in/clip-out" convenience with a minimal amount of installation. Once installed, they simply click into the female part of the BMW factory seat belts! For quite some time, Schroth has been supplying high quality and well built seat harnesses for professional and enthusiast racers. The quality is so good and the product is so well tested that they are the only harness to carry DOT approval for street use. This harness belt features asm technology, a 4-point mounting configuration with four individual adjusters, and a quick-release buckle that disconnects tail strap to allow occupants easy access to rear seats when the Rallye 4 harnessbelt is not in use. The dual tail strap is designed to clip into the two stock rear seat lap belt female connectors - the 'D' and 'E' points. Installation takes between 30 minutes and an hour and a half, depending on the installer’s experience. Once installed, the belts simply click into or out of the female connectors of the BMW factory seat belts. Note: SoloRacer.com and Mark Odom take no responsibility for any damage you enact following these instructions. Do so at your own risk. If you are unsure about your ability to do this installation, have a professional do it for you. You are working with integral safety components of the car, and errors could lead to very dangerous situations. Please read the rest of our Legal Disclaimer for more details. Installation Info: Detailed Installation Instructions (right click, save as) Driver Side (two connectors to install): Lap Belt - Outside uses Schroth bolt-in 4" connector Inside plugs into BMW reciever Tail Strap - E Point uses Schroth bolt-in 4" connector D Point plugs into BMW reciever Passenger Side (two connectors to install): Lap Belt - Outside uses Schroth bolt-in 4" connector Inside plugs into BMW reciever Tail Strap - E Point plugs into BMW reciever D Point uses Schroth bolt-in 4" connector |
|
 Lap belts clip in and out in seconds (click photo to enlarge)The lap belts clip into the factory seat belt on the inward side, and clip into an installed Schroth 4" adapter on the outward side. This allows the belts to be removed from the car by just unclipping them, and when its time to autocross, just clip them back in! |
|
|
 Shoulder belts clip in and out in seconds (click photo to enlarge)The shoulder belts clip into the factory seat belt on the inward side, and clip into an installed Schroth 4" adapter on the outward side. This allows the belts to be removed from the car by just unclipping them, and when its time to autocross, just clip them back in! |
|
WARNING! - Motor sports can be extremely dangerous, injury or death can occur. No warranty is made or implied regarding any product sold by Devo Tech, Inc. / SoloRacer.com to protect users from injury or death. The user assumes all risks. Please read the rest of our Legal Disclaimer before ordering. Our on-line store is up and running 24 hours a day, 7 days a week. We use Yahoo! Secure Servers for all transactions so you can shop with complete confidence. If you are uncomfortable ordering online, call or email us for more ordering options. ©Copyright 2002-2024 by Devo Tech, Inc. |